Editing - Ricoh 1232 Series Operating Instructions Manual

Editing

Use this procedure to change the
Groups already programmed.
Note
❒ You cannot change destinations
for the group which is being used
for a Memory Transmission on
standby.
Press [Dest. Management] ⇒ [Program/
Change/Delete Group].
A A A A
Select the key for the group you
want to change.
B B B B
Change the contents of the group.
Editing a Group Name
A Press [Group Name].
B Press [Backspace] or [Delete All],
reenter the Group name, and
then press [OK].
Reference
See "Entering Text" in the
General Settings Guide.
The display appears as in step
B
.
Editing Key Display
A Press [Key Display].
B Press [Backspace] or [Delete All],
reenter the Key Display, and
then press [OK].
Reference
See "Entering Text" in the
General Settings Guide.
The display appears as in step
B
.
Editing a destination
programmed in a Group
A Press [Change] for the destina-
tion you want to edit.
The name of the destination is
displayed under the fax number
i f t h e d e s t i n a t i o n i s p r o -
grammed with the Quick Dial
Table.
B Edit the destination using the
number keys or destination
key.
Note
❒ If the destination is pro-
grammed with the number
keys, press [Clear] or the
{ { { { Clear/Stop} } } } key and enter
the fax number of the desti-
nation.
Groups
3
45