Ricoh 1232 Series Operating Instructions Manual page 10

Getting Started
{ { { { Program} } } } key
8.
Enables you to program frequently used
settings and recall the programmed set-
tings. See p.81 "Programs", Facsimile Ref-
erence (option) <Advanced Features> .
1
{ { { { Clear Modes} } } } key
9.
Press to cancel the current settings.
10.
Operation Switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off). See p.149 "Power Fail-
ure Report", Facsimile Reference (option)
<Advanced Features> .
11.
Main Power indicator
This indicator goes on when the main
power switch is turned on.
12.
On indicator
This indicator goes on when the opera-
tion switch is turned on.
{ { { { Facsimile} } } } key
13.
Press to switch to the Facsimile mode.
• Lights up in yellow
Facsimile mode has been selected.
• Lights up in green
Facsimile mode has been printing.
• Lights up in red
Lights up whenever any facsimile er-
ror occurs. Press the { { { { Facsimile} } } } key to
display the error message and take the
appropriate action.
{ { { { On Hook Dial} } } } key
14.
Press when the manual facsimile recep-
tion is set, or using the facsimile informa-
tion services.
{ { { { Pause/Redial} } } } key
15.
Pause:
Insert a pause when you are dialing or
storing a fax number. A pause cannot be
inserted as the first digit.
Redial:
Press to redial one of the last ten num-
bers. See p.33 "Redial", Facsimile Refer-
ence (option) <Advanced Features> .
6
{ { { { Tone} } } } key
16.
Press to send tonal signals down a pulse
dialing line.
17.
Number keys
Use to dial fax numbers or enter the
number of copies.
{ { { { #} } } } key (Enter key)
18.
Registers entered numbers or settings.
{ { { { Clear/Stop} } } } key
19.
Clear:
Cancels entered numbers.
Stop:
Interrupts the current operation (trans-
mission, scanning, copying or printing).
{ { { { Start} } } } key
20.
Press to start faxing, scanning, copying or
printing.