Ricoh 1232 Series Operating Instructions Manual page 22

Faxing
❒ You can set whether the machine
will return to the default transmis-
sion mode (Memory Transmission
or Immediate Transmission) after
e v e ry t r an s m i s si o n . Y o u c an
change this so that the desired set-
ting is maintained. See p.102 "Gen-
e r a l S e t t i n g s / A d j u s t m e n t " ,
2
Facsimile Reference (option) <Ad-
vanced Features> .
A A A A
Make sure that Memory Trans-
mission is selected.
If it is not, press [Memory TX].
B B B B
Place the original.
Note
❒ Note that you cannot place pag-
es on the exposure glass after
you have started using the op-
tional Document Feeder (ADF).
❒ You can send the first pages
from the exposure glass then the
remaining pages from the op-
tional Document Feeder (ADF).
After you remove the last page
from the exposure glass, you
have 60 seconds to insert the re-
maining pages in the optional
Document Feeder (ADF).
❒ To store multiple page originals
from the exposure glass, place
them page by page.
❒ The original can be placed in ei-
ther the optional Document
Feeder (ADF) or exposure glass
until the { { { { Start} } } } key is pressed.
18
Reference
See p.11 "Placing Originals".
C C C C
Make the necessary settings you
require.
Reference
See p.25 "Scan Settings".
D D D D
Dial a destination.
Note
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key,
an d t h e n en t e r t h e c o r r ec t
number.
Reference
See p.29 "Dialing".
See p.31 "Quick Dials".
See p.32 "Groups".
See p.33 "Chain Dial", Facsimile
Reference (option) <Advanced Fea-
tures> .
See p.33 "Redial", Facsimile Ref-
erence (option) <Advanced Fea-
tures> .