Assign Outputs; Settings - Siemens Synco 200 SEZ220 Documentation On Basics

Assignment rules
without SPLIT
Assignment rules
with SPLIT
Configuration
Setting values
26 / 46
Siemens
Building Technologies
6.3

Assign outputs

When configuration parameter SPLIT is inactive, the following applies:
• 1 of the 3 function types MIN, MAX and AVR can be assigned to each output
(parameter MOD1AOx / TYP AOx).
• Each of the assigned function types considers all active inputs.
• The value range of output Y1 can be specified with parameters MINVAL1,
MAXVAL1. The same applies to output Y2 (MINVAL2, MAXVAL2).
Example: DC 0...10 V corresponds to 0...50 °C.
When SPLIT is active, the following applies:
• 1 of the 3 function types MIN, MAX and AVR can be assigned to each output
(parameter MOD1AOx / TYP AOx).
• The first output (AO1) with its function type considers input range IN 1 – IN 2.
• The second output (AO2) with its function type considers input range IN 3 – IN 5.
• The value range of output Y1 can be specified with parameters MINVAL1,
MAXVAL1. The same applies to output Y2 (MINVAL2, MAXVAL2).
Example: DC 0...10 V corresponds to 0...50 °C.
6.4

Settings

COMMIS > CONF > MIN-MAX-AVR
Path:
Display Name
IN 1 Input 1
IN 2 Input 2
IN 3 Input 3
IN 4 Input 4
IN 5 Input 5
SPLIT Inputs segregated
MOD1AO1 Min-max average output 1
MOD1AO2 Min-max average output 2
TYP AO1 Function type output 1
TYP AO2 Function type output 2
... > PARA > MIN-MAX-AVR
Path:
Display Name
FACTIN1 Factor input 1
MINVAL1 Value low 1
MAXVAL1 Value high 1
MINVAL2 Value low 2
MAXVAL2 Value high 2
SEZ220 signal converter
Function block MIN-MAX-AVR
Settings
---, X1...X5
---, X1...X5
---, X1...X5
---, X1...X5
---, X1...X5
NO, YES
---, Y1, Y2
---, Y1, Y2
MIN, MAX, AVR
MIN, MAX, AVR
Range Factory setting
TEMP
1...100 1
−999.9...+9999.9 −50
−999.9...+9999.9
250
−999.9...+9999.9 −50
−999.9...+9999.9
250
% or 0
1
0
100
0
100
CE1P5146en
02.06.2008