Important Notes - Siemens Synco 200 SEZ220 Documentation On Basics

Field of use
Intended use
Electrical installation
Commissioning
Operation
Wiring
Storage and transport
Maintenance
Faults
Disposal
Siemens
Building Technologies
2.6

Important notes

The symbol to the left denotes special safety notes and warnings. Failing to
observe these notes may result in injury and/or serious damages.
You may only use Synco™ 200 products to control and monitor heating, ventilating,
air conditioning, and chilled water plants.
Safe and trouble-free operation of Synco™ 200 products presupposes transport,
storage, mounting, installation and commissioning as intended as well as careful
operation.
Fuses, switches, wiring and earthing must comply with relevant national safety
regulations for electrical installations.
Only qualified staff trained by Siemens Building Technologies may prepare and
commission Synco™ 200 products.
Only persons trained by Siemens Building Technologies or their representatives
who are properly informed of the risks may operate Synco™ 200 products.
When wiring, strictly separate AC 230 V mains voltage from AC 24 V safety extra-
low voltage (SELV) to protect against electrical shock!
Refer to the environmental conditions specified in the respective data sheets for
storage and transport.
Contact your supplier or Siemens Building Technologies if you have any questions.
Synco™ 200 products are maintenance-free and require only cleaning at regular
intervals. We recommend removing dust and dirt from system components
installed in the control panels during standard service.
Call service staff responsible for your plant in case of system faults; do not
diagnose and correct faults.
Only authorized staff may diagnose and correct faults and recommission the plant.
This applies to working within the panel as well (e.g. testing or changing fuses).
Devices contain electrical and electronic components; do not dispose of them in
the household garbage.
Comply with all local, applicable laws.
SEZ220 signal converter
Overview
9 / 46
CE1P5146en
02.06.2008