Exit Commissioning - Siemens Synco 200 SEZ220 Documentation On Basics

User information
Plant is started
Exit
20 / 46
Siemens
Building Technologies
4.7

Exit commissioning

After quitting the COMMIS (C
following information telling the user that the plant is started:
PASS
COMMIS
5146Z16
The following happens after you press OK:
• Application starts:
−
All sensors are checked, and
−
Existing sensors are marked for future fault status messages.
• The display changes to the next higher menu level and the first menu symbol
COMMIS flashes:
PASS
COMMIS
INFO PARA
5146Z17
Press ESC once.
If the signal converter is in normal mode, an Info page is displayed:
PASS
5146Z18
SEZ220 signal converter
Commissioning
) menu, pressing ESC displays the
ommissioning
CE1P5146en
02.06.2008