Siemens 7XV5662-0AB01 Directions For Use Manual page 57

7XV5662-0AB01
Figure 34 shows the full parameter set and test constellation.
Figure 34 Finish of the parameter assignment
Before downloading the parameter sets into different CC–S
has to be connected with standard DIGSI
During the transmission all commands given by the FOS0–Configurator can be monitored in
the Data Transfer Window.
Note: If one connection (B–Channel) is not used type "–" for the number.
The FOS0–Configurator ignores the during the parameter check.
C53000-B1174-C166-1
's the PC–Interface and CC–S
0
®
–communication cable 7XV5100–4.
English
0
57