Siemens 7XV5662-0AB01 Directions For Use Manual page 56

English
Example 1:
Parameter assignment of a 3 Ended dialling constellation with 3 connections in
"ring topology".
Figure 33 parameter assignment of a 3 Ended dialling constellation
The figure 33 shows the basic setting of the FOS0–Configurator after choosing 3 devices in
the Standard–Windows–Button field.
To assign the parameters the sequence following is useful:
q
Choose the D–Channel–Protocol in Drop–Down–Menu (D–Channel–Protocol, in this
example dialling line DSS1, figure 33).
q
Type in the own dialing number for every pair of fibre optic cables
<own FO1/LWL1/Number> respectively <own FO2/LWL2/Number>.
q
Assign the phone number of the partner device in the Drop–Down–Menu <Number>.
q
Activate "DIAL" or "ACCEPT" for every CC–S
dial the other and the other CC–S
q
Test the parameter assignment of the constellation by clicking the green hook in the
Standard–Windows–Button field. All parameters are tested. The result can be seen the
message window. If an error occurs some correction must be done.
q
The download of every parameter set to the corresponding CC–S
3 ended constellation with 3 involved CC–S
downloaded into the CC–S
56
0
has accept the incoming call.
0
0
.
0
. For every connection one CC–S
's, 3 different parameter sets has to be
has to
0
. In the example of a
0
C53000-B1174-C166-1