Siemens 7XV5662-0AB01 Directions For Use Manual page 53

7XV5662-0AB01 English
FOS0–Configurator
Before the parameter assignment is shown in two examples, some general function of the
FOS0–Configurators are described:
The first four buttons are Standard–Windows–Buttons. These buttons are used for file
transaction (open, close and saving a file) and program exit (figure 27). With the drop–down–
menu the number of all participated CC–S in constellation can be chosen.
0
The next button, the green hook, starts a plausibility check of the parameter of the constel-
lation. The results of the plausibility test are shown in the message window (see figure 26
below). Errors are displayed in red and warnings are displayed in blue.
Figure 27 Main Menu FOS0–Configurator
The CC–S –parameter assignment window (figure 28) is similar to the printing on the CC–
0
S top housing. For a better overview all data which are assigned in this window may be
0
registered also on the CC–S housing.
0
Figure 28 Parameter assignment Window of the FOS0–Configurator
C53000-B1174-C166-1 53