Chicco GRO-UP 123 Instructions Manual page 20

another approved by the manufacturer as
it forms an integral part of the child car
seat. To ensure child car seat's safety, never
use it without its fabric cover.
• Check that the safety harness strap is not
twisted to avoid that the strap or any parts
of the child car seat remain trapped be-
tween the car doors, or rub against cutting
edges.
• The child car seat must be replaced should
the harness be cut or frayed.
• When the child car seat is not in use, it
should be left secured to the car's seat,
or stowed in the car's boot with the seat
inclination adjuster handle completely in-
serted into the lower part of the child car
seat. In fact, an unsecured Car seat may
pose a hazard to the passengers in case of
accident or sudden braking.
• Do not transport loose or unsecured ob-
jects or baggage on the back shelf of the
vehicle: they may injure the passengers in
case of accident or sudden braking.
• Check that the car seat headrest does not
interfere with that of the baby car seat:
do not push it forwards. If this is the case,
remove the headrest from the car seat on
which the child car seat is fitted, without
resting it on the luggage rack.
• Ensure that all the car passengers fasten
their seat belt, for their own safety and be-
cause, during the journey, they may injure
the child in the event of an accident or
sudden braking of the car.
• On long journeys make frequent stops.
Children get tired easily. Do not remove
the child from the child car seat while trav-
elling. If your child needs attention, find a
safe place and stop.
CONTENTS:
1. DESCRIPTION OF THE PARTS
2. PRODUCT FEATURES
3. RESTRICTIONS AND REQUIREMENTS
REGARDING THE USE OF THE PRODUCT
AND CAR SEAT
4. FITTING THE CHILD CAR SEAT IN THE CAR AND
SEATING THE CHILD IN GROUP 1 (9-18 KG)
5. CHANGE OF CHILD CAR SEAT SET-UP
FROM GROUP 1 (9-18 KG) TO GROUP 2/3
(15-36 KG)
6. FITTING THE CHILD CAR SEAT IN THE CAR
AND SEATING THE CHILD IN GROUP 2/3
(15-36 KG)
7. REFITTING THE HARNESS FOR SEATING IN
GROUP 1 (9-18 KG)
8. ADJUSTING THE HEIGHT OF THE
HEADREST
9. RECLINING
10. CLEANING AND MAINTENANCE
1. DESCRIPTION OF THE PARTS
Fig. 1 (front):
A. Adjustment knob for headrest and harness
B. Headrest
C. Diagonal belt routing slots
D. Shoulder straps
E. Child car seat harness
F. Buckle
G. Crotch strap protection
H. Harness adjustment button
I. Harness adjustment strap
J. Booster cushion
K. Reclining handle
L. Waist belt routing
Fig. 2 (back):
M. Car belt routing slot for Group 1 installation
N. Shoulder strap slots
2. PRODUCT FEATURES
• This child car seat is approved for "Group 1,
2 and 3", for the transport of children from
9 up to 36 kg of weight (from 9/12 months
to approximately 12 years of age), and con-
forms to European Standard ECE R 44/04.
• This approval is "Universal", which means
that the child car seat can be used on all
types of cars.
WARNING! "Universal" means that it fits
most, but not all, car seats.
IMPORTANT WARNING
1. This is a "Universal" child restraint. It is ap-
proved to Regulation No. 44.04 series of
amendments, suitable for general use in
vehicles and compatible with most but
not all vehicles' seats.
2. A correct fit is likely if the vehicle manu-
facturer has declared that the vehicle is
capable of fitting a "Universal" child re-
straint for this age group.
3. This child restraint device has been clas-
sified as "Universal" under more stringent
conditions than those that were applied
20