16.3.2 Replacing the HDD cable (bottom HDD cage)
Upgrade and Repair Unit
(URU)
Tool:
Phillips PH2 / (+) No. 2 screw driver
16.3.2.1 Preliminary steps
"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê
16.3.2.2 Removing the defective HDD cable
Ê If applicable, remove HDD1 and HDD2, see section
HDD" on page
Ê Pull the system board tray out of the chassis, see section
system board" on page
Figure 135: Removing the screws
Ê Remove the two screws (see circles).
TX1310 M3
90.
198.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing a 3.5-inch
"Removing the
Cables
217