Changing Passwords - Avaya 8800 Commissioning Manual

Initial steps using EDM
Variable
Month
Date
Hour
Minute
Second

Changing passwords

Configure new passwords for each access level, or change the logon or password for the
different access levels of the switch. After you receive the Avaya Ethernet Routing Switch
8800/8600, use default passwords to initially access the CLI. If you use Simple Network
Management Protocol version 3 (SNMPv3), you can change passwords that are in encrypted
format.
Procedure steps
1. In the navigation tree, open the following folders: Configuration > Security >
2. Click General.
3. Click the CLI tab.
4. Specify the user name and password for the appropriate access level.
5. Click Apply.
Variable definitions
Use the data in the following table to configure the CLI tab.
Variable
RWAUserName
RWAPassword
RWEnable
RWUserName
76 Commissioning
Configures the month
Configures the day (integer 1–31)
Configures the hour (integer 0–23)
Configures the minute (integer 0–59)
Configures the second (integer 0–59)
Control Path.
The Port Lock dialog box appears with the System tab displayed.
Specifies the user name for the read/write/all CLI account.
Specifies the password for the read/write/all CLI account.
Activates the read/write access level.
Specifies the user name for the read/write CLI account.
Value
Value
June 2011