Configuring The Switch With The Setup Utility - Avaya 8800 Commissioning Manual

Initial steps using the ACLI
ipcp_accept_remote
login
chap_file "my_chap"
pap_file "my_pap"

Configuring the switch with the setup utility

Configure the switch with the setup utility to monitor system requirements and obtain the
maximum system performance.
Prerequisites
You must log on to the Privileged EXEC mode in the ACLI.
Procedure steps
1. Start the setup utility by using the following command:
2. Respond to the series of questions displayed on the screen.
3. Restart the switch.
Job aid
The following table lists the questions prompted by the setup utility and provides a description
for each.
Please provide primary config-file
path [/flash/config.cfg]:
60 Commissioning
install
For more information about the prompted questions, see the following job aid.
Prompt Description and action
Description: Indicates the name of the primary
configuration file.
Action: Press Enter to accept the default (/flash/
config.cfg), or type a different file name for the primary
configuration file. To store your configuration file on
the external flash (8895 SF/CPU) or PCMCIA card
(8692 SF/CPU), use /PCMCIA/config.cfg. To specify
the path to the file is optional.
June 2011