Extron electronics DXP HD 4K PLUS Series User Manual page 67

Command
Information Requests (continued)
View detailed firmware version
information
X2^
NOTE: For , the following symbols may appear after the version number (see the example below):
* = The firmware version is the current or active version.
•
?.?? = Only the factory firmware version is loaded. This replaces the updated firmware version.
•
^ = The default factory firmware version is loaded instead of the listed version due to a mode 1 reset.
•
! = The current firmware version is corrupted.
•
Example response:
version kernel
number version
1.00-1.00.0000-b001(1.81LX-DXP-HD -Thu, 01 Jan 2015 00:01 UTC)-1.00.0000-b004*(1.91LX-DXP-HD -Mon, 16 Nov 2015 10:26 UTC)]
boot factory base firmware version
loader
version
View matrix status
View power supply status
View temperature
View fan speed
KEY:
X2%
= Firmware version
X2^
= Verbose firmware version
X2&
= Power supply
X2*
= Temperature
X2(
= Fan
ASCII Command Response
(Host to Switcher) (Switcher to Host)
0Q
X2%
upload date
and time
S X2&
Sts00*
1S X2&]
Sts01*
2S
X2*]
Sts02*
3S
X2(]
Sts03*
n.nn
[version]([kernel]-[description]-[upload date and
time])
In volts
In degrees Celsius
In RPM
DXP HD 4K PLUS Series • SIS Configuration and Control
Additional Description
X2^ X2^ ] View the boot loader, factory,
- -
1 2
and current user firmware
versions.
X2%
X2^
X2^
indicator model
description
updated firmware version
X2* X2(] View the power supply
• •
voltage, temperature, and fan
speed status.
X2& X2* X2(]
Verbose modes 2 and 3
• •
View the power supply
voltage.
X2&] Verbose modes 2 and 3
View the internal temperature.
X2*]
Verbose modes 2 and 3
View the internal fan speed.
X2(] Verbose modes 2 and 3
= boot loader version
= factory base firmware
1
= updated firmware
2
59