Passwords Panel - Extron electronics DXP HD 4K PLUS Series User Manual

Figure 52.
To set the date and time:
1. Set the date by one of the following methods:
• Click the Today button to set the date to the current date on the PC (see figure 52,
1
• Select the date from the calendar by doing either of the following:
•
•
2. To set the time, click the up and down arrow buttons for each field to set the hours,
minutes, seconds, and AM or PM as desired. Alternatively, enter the desired value in each
field.
3. Click the Apply button. The dialog box closes and the new values are applied.
To cancel pending changes:
Click the Cancel button. The dialog box closes.

Passwords Panel

The Passwords panel (see figure 48,
administrator or user passwords. To assign passwords, click the Set button in the
Passwords panel. The Passwords dialog box opens. (By default, both passwords are set to
a carriage return.)
NOTE: The factory configured passwords for all accounts on this device have been set
to the device serial number. If the unit is reset to factory settings (see
page 34 or
to no password.
Date and Time Settings Dialog Box
).
Click the left and right arrow buttons in the calendar heading (
Click the drop-down menu next to the calendar month and year (
select the desired month and year. Click the OK button to accept the selected
settings or the Cancel button to cancel pending selections.
E
ZQQQ } SIS command
on page 87) provides an option to set
6
[see page 57]), these passwords are set
DXP HD 4K PLUS Series • Internal Web Page
).
2
), and
3
mode 5 reset on
92