Extron electronics DXP HD 4K PLUS Series User Manual page 74

Command
Output Configuration Commands
Output Name
Set output name
View output name
Output Format
Set output format
View output format
Output HDCP Mode
Set output HDCP mode to
Auto
Set output HDCP mode to On
View HDCP mode
Output HDCP Status
View output HDCP status
View all outputs HDCP status
KEY:
X@
= Output number
X$
= Output name
X*
= Output format
X1)
= HDCP mode
X1!
= Output HDCP status
ASCII Command Response
(Host to Switcher) (Switcher to Host)
E X@ X$ }
, NO Nmo
E X@ } X$]
NO
Nmo
E X@ X* }
* VTPO Vtpo
E X@ } X*]
VTPO
Vtpo
E X@ }
S *0HDCP HdcpS
E X@ }
S *1HDCP HdcpS
E X@ } X1)]
S HDCP
HdcpS
E X@ } X1!]
O HDCP
HdcpO
E } X1!
OHDCP
Verbose modes 2 and 3:
HdcpO00*
HDMI output, 1 through <maximum number of outputs>:
DXP 42 — 1 or 2, DXP 44 and 84 — 1-4, DXP 88 — 1-8
16 alphanumeric characters
0 = auto (default)
1 = DVI RGB 4:4:4 Full
2 = HDMI RGB 4:4:4 Full
3 = HDMI RGB 4:4:4 Limited
0 = auto (follow the input, default)
1 = on (always encrypt HDMI outputs)
0 = no sink connected
1 = sink connected but does not support HDCP
2 = sink connected and supports HDCP, but currently not encrypted
3 = sink connected, supports HDCP, and is currently encrypted
DXP HD 4K PLUS Series • SIS Configuration and Control
Additional Description
Set the name of an
X@ X$]
,
output.
View the name of an
X@ X$] output.
,
Verbose modes 2 and 3
X@ X*]
*
Set format
X@
View the format of an
output.
X@ X*]
*
Verbose modes 2 and 3
X@ ]
*0
Set output
mode to Auto.
X@ ]
*1
Set output
always encrypted.
View the HDCP mode.
X@ X1)]
*
Verbose modes 2 and 3
View the HDCP status of
an output.
X@ X1!]
*
Verbose mode 2 and 3
View the HDCP status of
X1! X1! X1! ]
1 2 3 4
all outputs.
X1! X1! X1! X1! ]
1 2 3 4
4 = HDMI YUV 4:4:4 Full
5 = HDMI YUV 4:4:4 Limited
6 = HDMI YUV 4:2:2 Full
7 = HDMI YUV 4:2:2 Limited
X*
of output
.
X@
HDCP
X@
HDCP to
66