Extron electronics DXP HD 4K PLUS Series User Manual page 57

Command
Input and Output Tie Commands (continued)
View Ties
View HDMI and audio output
tie
View HDMI output tie
View audio output tie
Input Configuration Commands
Input Name
Set input name
View input name
HDCP Authorized Device
Set HDCP Authorized device
setting
View HDCP Authorized device
setting
Input HDCP Status
View input HDCP status
View all input HDCP status
KEY:
X!
= Input number
X@
= Output number
X$
= Name
X^
= HDCP Authorized device
X&
= Input HDCP status
ASCII Command Response
(Host to Switcher) (Switcher to Host)
X@ X!]
!
Out
X@ X!]
% or
X@
&
Out
X@ X!]
$
Out
E X! X$ }
, NI Nmi
E X! } X$]
NI
Nmi
E X! X^ }
E * HDCP HdcpE
E X! } X^]
E HDCP
HdcpE
E X! } X&]
I HDCP
HdcpI
E } X&
IHDCP
HdcpI00*
1 through <maximum number of inputs>
0 = untie (for ties if applicable)
HDMI output, 1 through <maximum number of outputs>:
DXP 42 — 1 or 2, DXP 44 and 84 — 1-4, DXP 88 — 1-8
Up to 16 alphanumeric characters
0 = block HDCP encryption
1 = allow HDCP encryption (default)
0 = no source detected
1 = source is HDCP compliant
2 = source is not HDCP compliant
DXP HD 4K PLUS Series • SIS Configuration and Control
X@ • X! • ]
In All
X@ • X! • ]
In Vid
X@ • X! • ]
In Aud
X! X$]
,
X! X$]
,
X! X^]
*
X! X^]
*
X! X&]
*
X& X& ]
...
1 2 n
X& X& X& ]
...
1 2 n
Additional Description
View input tied to an HDMI
and audio output.
Verbose modes 2 and 3
View input tied to an HDMI
output.
Verbose modes 2 and 3
View input tied to an audio
output.
Verbose modes 2 and 3
Set the name of an input.
View name of an input.
Verbose modes 2 and 3
Set the HDCP Authorized
device setting for an input.
View the HDCP Authorized
device setting for an input.
Verbose modes 2 and 3
View the HDCP status on
an input.
Verbose modes 2 and 3
View the HDCP status for
all inputs. = the maximum
n
number of inputs
Verbose modes 2 and 3
49