Extron electronics DXP HD 4K PLUS Series User Manual page 68

Command
IP Control Port Commands
IP Setup
Set DHCP mode
24
View DHCP mode
Set IP address
24
View IP address
Set subnet mask
24
View subnet mask
Set gateway IP address
24
View gateway IP address
View MAC address
View number of open
connections
Port Timeout
Set current port timeout
View current port timeout
Set global IP port timeout
View global IP port timeout
KEY:
X#
= Enable or disable
X3)
= IP address
X3!
= Subnet mask
X3@
= Gateway address
X3#
= MAC address
X3$
= Open connections
X3%
= Port timeout
ASCII Command Response
(Host to Switcher) (Switcher to Host)
E X# }
DH Idh
E } X#]
DH
E X2* }
CI Ipi
E } X3)]
CI
E X3! }
CS Ips
E } X3!]
CS
E X3@ }
CG Ipg
E } X3@]
CG
E } X3#]
CH
Iph
E } X3$]
CC
Icc
E X3% }
0* TC Pti0*
E } X3%]
0TC
Pti0*
E X3% }
1* TC Pti1*
E } X3%]
1TC
Pti1*
0 = disable, 1 = enable
nnn.nnn.nnn.nnn (192.168.254.254 = default)
nnn.nnn.nnn.nnn (255.255.0.0 = default)
nnn.nnn.nnn.nnn (0.0.0.0 = default)
00-05-A6-xx-xx-xx
0-<maximum number of open connections>
1 to 65000 in 10-second intervals (30 = default).
DXP HD 4K PLUS Series • SIS Configuration and Control
Additional Description
Enable or disable DHCP.
X#]
View the DHCP mode setting.
Set the IP address.
• X3)]
View the current IP address.
Set the subnet mask.
• X3!]
View the subnet mask setting.
Set the gateway IP address.
• X3@]
View the gateway IP address.
00-05-A6-xx-xx-xx
• X3#]
Verbose modes 2 and 3
View the number of open
connections.
X3$]
Verbose modes 2 and 3
Set the duration of inactivity
X3%]
required to automatically
terminate a connection on the
current port.
View the duration of inactivity
required to automatically
X3%]
terminate a connection on the
current port.
Set the initial timeout value for
X3%]
any connection.
View the initial timeout value
for any connection.
X3%]
60