Principle Of The Starter Commissioning Tool For Sinamics S120 - Siemens SINAMICS S120 Getting Started

Prerequisites
2.3.2 Principle of the STARTER commissioning tool for SINAMICS
S120
When you create a drive unit for a SINAMICS S120 system, the following prin-
ciples apply:
The tool is used to configure objects (e.g. infeed). The object name is user de-
fined.
In STARTER, a drive unit always comprises a control unit and the associated
drives.
With a controlled infeed, the active line module is configured in STARTER. An un-
controlled infeed is not configured in STARTER.
The drive comprises, for example, a motor module (power section) and a motor
with an encoder.
Fig. 2-4 shows the STARTER project navigator. You can see that a project
(Project_Philosophy) and a drive unit (Drive_Unit_One_Motor) have been con-
figured for a drive.
Fig. 2-4
2-24
Drive unit with one motor
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition
 Siemens AG, 2004. All rights reserved