Siemens SINAMICS S120 Getting Started page 53

Starter commissioning tool

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Fig. 4-4

You can enter an application monitoring time, which is the time that elapses be-

tween two setpoints before the sign-of-life monitoring function on the drive re-

sponds (fault 1910).

You can use the default monitoring time (e.g. 3000 ms).

3. Since our example concerns commissioning, confirm this dialog box for assum-

ing control priority by choosing OK.

Fig. 4-5

4. To display, amongst other things, the status lamps for the control word bits,

choose Display/hide diagnostics view.

Table 4-1 lists the most important digital input signals of the control word for

sequence control. You need these to set the motor in motion and issue them via

the control panel for the control unit (CU320).

SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition

Using the STARTER Control Panel (Motor Rotates)

Transfer control priority to PC

Status "lamps" for the control word

bits.

Diagnostics view

You can use the default monitoring time

(e.g. 3000 ms).

To continue with commissioning, choose

OK.

Choose Display/hide diagnostics

view.

4-53

Table of Contents