Siemens SINAMICS S120 Getting Started page 47

Starter commissioning tool

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Fig. 3-25

21.Choose Finish.

As you can see in Fig. 3-26, the configuration Wizard has created the objects

(including Drive_1) for drive unit SINAMICS_CU320 in the project navigator.

Fig. 3-26

22.Save project Project_2 by choosing Project > Save.

Once you have configured the drive unit with STARTER in OFFLINE mode, con-

tinue with the steps described in Chapter 4 "Starting the Drive Project (Motor Ro-

tates)", where you will set the drive interface parameters and start the motor.

SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition

Summary

Project navigator with SINAMICS_CU320

Creating the Drive Project OFFLINE

3-47

Table of Contents