Fig. 5-7
3. In the project navigator, double-click Automatic configuration under the drive
unit.
Fig. 5-8
4. In the "Automatic Commissioning" dialog box, choose:
– Servo or Vector for the "Drive object type"
– Complete upload under "Upload type".
5. Choose Load to PG (Upload).
STARTER automatically searches for all drive unit components that are con-
nected properly and then uploads them.
Siemens AG, 2004. All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition
Double-click
Automatic configuration.
Automatic configuration
Choose
Load to PG (Upload).
Automatic commissioning
Creating the Drive Project ONLINE
5-65