4-2. Driving Procedures; Power (Ignition) Switch - Lexus RX 450h Owner's Manual

246

4-2. Driving procedures

4-2.Driving procedures

Power (ignition) switch

Performing the following opera-
tions when carrying the electronic
key on your person starts the hybrid
system or changes power switch
modes.
Starting the hybrid system
1 Check that the parking brake is set.
2 Check that the shift lever is in P.
3 Firmly depress the brake pedal.
and a message will be displayed on
the multi-information display.
If it is not displayed, the hybrid system can-
not be started.
4 Press the power switch shortly and
firmly.
When operating the power switch, one
short, firm press is enough. It is not neces-
sary to press and hold the switch.
If the "READY" indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal until
the "READY" indicator is illuminated.
The hybrid system can be started from any
� � � � � � � � � � � � � � � � �
power switch mode.
5 Check that the "READY" indicator
is illuminated.
The vehicle will not move when the
"READY" indicator is off.
Power switch illumination
■
According to the situation, the power
switch illumination operates as follows.
When a door is opened, or the power
●
switch mode is changed from ACCES-
SORY or ON mode to off, the power
switch illumination slowly blinks.
When depressing the brake pedal with
●
carrying the electronic key on your per-
son, the power switch illumination rapidly
blinks.
When the power switch is in ACCES-
●
SORY or ON mode, the power switch
illumination illuminates.
If the hybrid system does not start
■
The immobilizer system may not have
●
been deactivated. (P.120)
Contact your Lexus dealer.
Check that the shift lever is securely set in
●
P. The hybrid system may not start if the
shift lever is displaced out of P. "To Start
Vehicle, Put Shift Lever into P" will be dis-
played on the multi-information display.