Lexus RX 450h Owner's Manual page 508

506 6-3. Do-it-yourself maintenance
6 Remove the light bulb.
Install a new light bulb and then
7
install the bulb base to the light unit
by inserting it and turning it clock-
wise.
After installing the bulb base, wiggle it
lightly to make sure it is securely installed
and turn on the rear turn signal lights to vis-
ually check that there is no light leaking
from between the bulb base and light unit.
8 Install the light unit.
Align the tabs and push the light unitto-
ward the front of the vehicle to install it.
� � � � � � � � � � � � � � � � �
9 Install the 2 screws.
Install the cover.
10
11 Remove the protective tape.
Back-up lights (bulb type)
■
1 Open the back door and remove
the cover.
Using a flathead screwdriver, remove the
cover.
To prevent scratching to the vehicle, wrap
the tip of the flathead screwdriver with a
cloth, etc.