Lexus RX 450h Owner's Manual page 92

90 1-2. Child safety
does not, or if it interferes with the child
restraint, move to a different position.
Failure to do so may result in death or
serious injury.
 When installing a child restraint in
the rear seats, adjust the front seat
so that it does not interfere with the
child or child restraint system.
 When installing a child seat with
support base, if the child seat inter-
feres with the seatback when latch-
ing it into the support base, adjust
the seatback rearward until there is
no interference.
 If the seat belt shoulder anchor is
ahead of the child seat belt guide,
move the seat cushion forward.
 When installing a junior seat, if the
child in your child restraint system is
in a very upright position, adjust the
seatback angle to the most comfort-
able position. And if the seat belt
shoulder anchor is ahead of the
child seat belt guide, move the seat
cushion forward.
� � � � � � � � � � � � � � � � �
Child restraint system compati-
bility for each seating position
(for Taiwan)
Child restraint system compatibil-
■
ity for each seating position
Compatibility of each seating position
with child restraint systems (P.91)
displays the type of child restraint sys-
tems that can be used and possible
seating positions for installation using
symbols.
Check the selected child restraint sys-
tem together with the following
[Before confirming the compatibility of
each seating position with child
restraint systems].
Before confirming the compatibil-
■
ity of each seating position with
child restraint systems
1 Checking the child restraint system
standards.
Use a child restraint system that
conforms to UN(ECE) R44
*1, 2
UN(ECE) R129 .
The following approval mark is dis-
played on child restraint systems
which are conformed.
Check for an approval mark
*1
or