Lexus RX 450h Owner's Manual page 86

Hide thumbs Also See for RX 450h:

Table of Contents

1-2. Child safety

upright position. When installing a for-

ward-facing child seat, if there is a gap

between the child seat and the

seatback, adjust the seatback angle

until good contact is achieved.

Detail information for CRS installation

Seat position number

Seating position suitable for uni-

versal belted (Yes/No)

i-Size seating position (Yes/No)

Seating position suitable for lateral

fixture (L1/L2/No)

Suitable rearward facing fixture

(R1/R2X/R2/R3/No)

Suitable forward facing fixture

(F2X/F2/F3/No)

Suitable junior seat fixture

ISOFIX child restraint systems are divided into different "fixture". The child

restraint system can be used in the seating positions for "fixture" mentioned in the

table above. For kind of "fixture" relation, confirm the following table.

If your child restraint system has no kind of "fixture" (or if you cannot find informa-

tion in the table below), please refer to the child restraint system "vehicle list" for

compatibility information or ask the retailer of your child seat.

� � � � � � � � � � � � � � � � �

: If the head restraint interferes with your

child restraint system, and the head

restraint can be removed, remove the

head restraint.

Otherwise, put the head restraint in the

upper most position.

: Use only a front-facing child restraint

Seating position

R1, R2X, R2,

R1, R2X, R2,