Lexus RX 450h Owner's Manual page 149

 Tachometer setting
Select to set the tachometer or Hybrid
System Indicator to always be displayed or
be changed to automatically according to
the driving mode.
 Needle (F SPORT models)
Select to set the tachometer needle color.
 Rev indicator (F SPORT models)
(P.139)
• Select to enable/disable the Rev indica-
tor.
• Select to set the desired engine speed at
which the Rev indicator will begin to be
displayed.
Selectable engine speed range:
2000 r/min to 6000 r/min
 Rev peak (F SPORT models)
(P.139)
Select to enable/disable the Rev peak.
 Default setting
Select to reset the meter display settings to
the default setting.
Vehicle functions and settings that
■
can be changed
P.574
Background color of the indicator/shift
■
position display area (except F SPORT
models)
The background color of the indicator/shift
position display area is changed according
to the driving mode as follows (P.374):
Eco drive mode: Blue
●
Sport mode: Red
●
Suspension of the settings display
■
Some settings cannot be changed while
●
driving. When changing settings, park
the vehicle in a safe place.
� � � � � � � � � � � � � � � � �
2-1. Instrument cluster
If a warning message is displayed, opera-
●
tion of the settings display will be sus-
pended.
WARNING
Cautions during setting up the dis-
■
play
As the hybrid system needs to be operat-
ing during setting up the display, ensure
that the vehicle is parked in a place with
adequate ventilation. In a closed area
such as a garage, exhaust gases includ-
ing harmful carbon monoxide (CO) may
collect and enter the vehicle. This may
lead to death or a serious health hazard.
NOTICE
While setting up the display
■
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while setting up the display features.
Suggestion function
Displays suggestions to the driver in
the following situations. To select a
response to a displayed suggestion,
use the meter control switches.
Suggestion to enable the power
■
back door (if equipped)
If the power back door system is disa-
bled (setting on set to off) and the
power back door switch on the instru-
ment panel is operated, a suggestion
message will be displayed asking if you
wish to enable the power back door
system.
To enable the power back door system,
select "Yes".
After enabling the power back door sys-
147
2