86
1-2. Child safety
feres with the seatback when latch-
ing it into the support base, adjust
the seatback rearward until there is
no interference.
If the seat belt shoulder anchor is
ahead of the child seat belt guide,
move the seat cushion forward.
When installing a junior seat, if the
child in your child restraint system is
in a very upright position, adjust the
seatback angle to the most comfort-
able position. And if the seat belt
shoulder anchor is ahead of the
child seat belt guide, move the seat
cushion forward.
Child restraint system compati-
bility for each seating position
(for Morocco)
Child restraint system compatibil-
■
ity for each seating position
Compatibility of each seating position
with child restraint systems (P.87)
displays the type of child restraint sys-
tems that can be used and possible
seating positions for installation using
symbols.
Check the selected child restraint sys-
tem together with the following
� � � � � � � � � � � � � � � � �
[Before confirming the compatibility of
each seating position with child
restraint systems].
Before confirming the compatibil-
■
ity of each seating position with
child restraint systems
Checking the child restraint system
1
standards.
Use a child restraint system that
conforms to UN(ECE) R44
*1, 2
UN(ECE) R129
.
The following approval mark is dis-
played on child restraint systems
which are conformed.
Check for an approval mark
attached to the child restraint sys-
tem.
Example of the displayed regulation num-
ber
UN(ECE) R44 approval mark
A
The weight range of the child who is
applicable for an UN(ECE) R44
approval mark is indicated.
UN(ECE) R129 approval mark
B
The height range of the child who is
*1
or
*3
*3