Lexus RX 450h Owner's Manual page 146

144 2-1. Instrument cluster
Registering a top screen
■
The displayed top screen can be
changed to a registered screen of your
choice. To register a screen as the top
screen, display the desired screen and
press and hold
 A message asking to confirm if reg-
istration is desired will be displayed.
If the selected screen cannot be
registered, a registration failure
message will be displayed.
 When no screen has been regis-
tered, the drive information screen
will be displayed.
Drive information
Content displayed as drive infor-
■
mation
Displays drive information such as the
following:
 Drive information 1
• Current fuel consumption
• Average fuel economy (after reset)
 Drive information 2
• Distance (driving range)
• Average vehicle speed (after reset)
 Drive information 3
• Average fuel economy (after refuel)
• Elapsed time (after start)
Displayed items (listed below) can be
changed on
 Current fuel consumption
Displays instantaneous current fuel con-
sumption
� � � � � � � � � � � � � � � � �
.
. (P.146)
 Average fuel economy
After reset: Displays average fuel con-
sumption since the display was reset
After start: Displays average fuel con-
sumption since hybrid system start
After refuel: Displays average fuel con-
*2, 3
sumption since refuel
 Average vehicle speed
After reset: Displays average vehicle
speed since the display was reset
After start: Displays average vehicle speed
since hybrid system start
 Elapsed time
After reset: Displays elapsed time since the
*1
display was reset
After start: Displays elapsed time since
hybrid system start
 Distance
Driving range: Displays driving range with
*3, 4
remaining fuel
After start: Displays drive distance since
vehicle start
 Other
Blank: No item
*1
: To reset, display the desired item and
press and hold of the meter con-
trol switch.
If both of the displayed items are reset-
table, a message will be displayed ask-
ing which item(s) to reset.
*2
: Use the displayed fuel consumption as a
reference.
*3
: When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the power switch
*1, 2
*2
*1