348
4-5. Using the driving support systems
Center Display (vehicles with a Pan-
oramic view monitor)
A graphic will be displayed on the Center
Display.
Turning Lexus parking assist-sen-
sor on/off
Use the meter control switches to ena-
ble/disable the Lexus parking
assist-sensor. (P.143)
1
Press
2
Press
and then press
3
Press
then press
When the Lexus parking assist-sensor
function is disabled, the Lexus parking
assist-sensor OFF indicator (P.132)
illuminates.
� � � � � � � � � � � � � � � � �
or
to select
.
or
to select "PKSA"
.
or
to select
and
.
To re-enable the system, select
the multi-information display, select
and turn it on. If the system is disa-
bled, it will remain off even if the power
switch is turned to ON mode after the
power switch has been turned off.
WARNING
When using the Lexus parking
■
assist-sensor
Observe the following precautions.
Failing to do so may result in the vehicle
being unable to be driven safely and pos-
sibly cause an accident.
Do not use the sensor at speeds in
●
excess of 10 km/h (6 mph).
The sensors' detection areas and reac-
●
tion times are limited. When moving
forward or reversing, check the areas
surrounding the vehicle (especially the
sides of the vehicle) for safety, and
drive slowly, using the brake to control
the vehicle's speed.
Do not install accessories within the
●
sensors' detection areas.
The area directly under the bumpers is
●
not detected.
Thin posts or objects lower than the
sensor may not be detected when
approached, even if they have been
detected once.
When to disable the function
■
In the following situations, disable the
function as it may operate even though
there is no possibility of a collision.
The vehicle is equipped with a fender
●
pole, wireless antenna or fog lights.
The front or rear bumper or a sensor
●
receives a strong impact.
A non-genuine Lexus suspension
●
(lowered suspension, etc.) is installed.
on