Lexus RX 450h Owner's Manual page 206

204 3-3. Adjusting the seats
Returning the rear seatbacks
■
(power seat)
1 Press and hold the return switch
until the rear seatback begins to
operate.
A buzzer will sound and then the operation
will start. When the operation is com-
pleted, the buzzer will sound twice again.
To stop the operation partway, press either
side of the switch for the operating seat.
Any rear seat operation switch for the
operating seat, regardless of location, can
be used to stop the operation. (A buzzer
may sound depending on the position that
the rear seatback is stopped.)
Using the seatback angle adjust-

ment switch
Using the switch in the luggage

compartment
� � � � � � � � � � � � � � � � �
2 Check that the plate of the seat belt
is on the front side of the seatback.
Folding the rear center seatback
■
only
Pull the lock release lever on the back
side of the seatback and fold the center
seatback.
To return the rear center seatback to its
original position, lift it until it locks in posi-
tion.
Power switch mode conditions under
■
which the rear seatbacks can be folded
down or raised (power seat)
The rear seatbacks can be folded down or
raised when the power switch is in either of
the following modes:
When the power switch is turned off or in
●
ACCESSORY mode
When the power switch is in ON mode
●
and any of the following conditions are
met:
• The parking brake is engaged.
• The brake pedal is depressed.