88
1-2. Child safety
Not suitable for child restraint sys-
tem.
Never use a rear-facing child
restraint system on the front pas-
senger seat when the airbag man-
ual on-off switch is on.
*1
: Move the front seat fully rearward. If the
passenger seat height can be adjusted,
move it to the upper most position.
*2
: Adjust the seatback angle to the most
upright position. When installing a for-
ward-facing child seat, if there is a gap
between the child seat and the
seatback, adjust the seatback angle
until good contact is achieved.
Detail information for CRS installation
■
Seat position number
Seating position suitable for
universal belted (Yes/No)
i-Size seating position
Seating position suitable for
lateral fixture (L1/L2/No)
Suitable rearward facing fix-
ture (R1/R2X/R2/R3/No)
� � � � � � � � � � � � � � � � �
Airbag manual on-off
ON
Yes
Forward
facing only
No
(Yes/No)
No
No
*3
: If the head restraint interferes with your
child restraint system, and the head
restraint can be removed, remove the
head restraint.
Otherwise, put the head restraint in the
upper most position.
*4
: Use only a front-facing child restraint
system when the airbag manual on-off
switch is on.
Seating position
switch
OFF
Yes
Yes
No
Yes
No
No
R1, R2X,
No
R2, R3
Yes
Yes
No
Yes
No
No
R1, R2X,
No
R2, R3