Provide The Keys.install File (If Necessary); Load The Keys File - Avaya G700 Installation And Upgrades

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):

Provide the keys.install File (If Necessary)

Use this procedure only if you selected one of the customer-provided keys options in the previous
procedure.
Create the keys file
Begin
If encryption between the NTS and S8300 Media Server is to be used for additional security, you
must provide a keys.install file that specifies for each key:
- The key number
- The encryption type
- The key code
If the keys file is short, the network administrator can create one now during configuration if needed:
On a directly connected laptop or other computer, create a flat-text file named keys.install with
1.
the correct keys information using any ASCII application.
Next, upload the keys.install file using the Upload Files to Server screen as described earlier.
2.
When finished, click on the Configure Server wizard window to resume server configuration.
3.
End

Load the Keys File

The keys file can be loaded in one of the following ways.
Upload the keys file
Begin
If a keys.install file was previously created on or downloaded to the services laptop or another
computer on the network, it can be installed now as follows.
In the main menu under Miscellaneous, click the Upload Files to Server link.
1.
Locate the keys.install file on your computer or network, then click Load File. The file is
2.
uploaded to the media server's FTP directory.
When finished, click on the Configure Server wizard window to resume server configuration.
3.
End
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
103