Avaya G700 Installation And Upgrades page 101

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
Figure 42. Set Modem Interface Screen
The Modem IP Address and Return Routes for the Avaya INADS alarming are assigned by the ART
tool. You should have obtained these addresses when you performed
INADS IP Address" on page
Click Continue.
The next Warning screen indicates that the data entry process has concluded and that the system is
ready to be configured.
Figure 43. Warning Screen
This is the final step in configuring the system. When you click Continue, all the configuration
information will be written to disk and implemented. This step normally completes in about 5
minutes.
This is your last chance to cancel or correct the configuration.
To check, or possibly change, something you entered on a previous screen, use your browser's
24.
Back button to page back through the Configure Server screens.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
69.
"Run the ART Tool for the
101