Avaya G700 Installation And Upgrades page 74

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
3. Locate the TCP/IP properties as follows:
- Windows 95, 98, and ME: On the Configuration tab, scroll through the installed network
components list to the TCP/IP part of the devices list. Select the TCP/IP device that
corresponds to your Ethernet card.
- Windows NT: On the Protocols tab, select TCP/IP in the installed network components list.
Select the Properties button.
4.
In the TCP/IP Properties box, click the IP Address tab.
5.
Click the radio button to Specify an IP address , and enter the following:
6.
- IP address: 192.11.13.5
- Subnet mask: 255.255.255.252
Note:
Disable DNS service as follows:
7.
- Windows 95, 98, and ME: Click the DNS Configuration tab. Verify that the Disable DNS
radio button is selected.
- Windows NT: Click the DNS tab.
• If any IP addresses appear under DNS Service Search Order, make a note of them in
case you need to restore them later.
• Select each IP address in turn and click the Remove button.
8. Disable WINS Resolution as follows:
- Windows 95, 98, and ME: Click the WINS Configuration tab. Verify that the Disable
WINS Resolution radio button is selected.
- Windows NT: Click the WINS Address tab.
• If any IP addresses appear for the Primary and Secondary WINS servers, make a note of
them in case you need to restore them later.
• Clear each server entry.
• Clear the checkbox for Enable DNS for WINS Resolution .
Click OK twice to accept the address information and close the Network dialog box.
9.
Reboot the system if directed to do so.
10.
End
74
Record any IP addresses, DNS settings, or WINS entries that you
change. You may need to restore them later to connect to another net-
work.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002