Avaya G700 Installation And Upgrades page 124

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
!
CAUTION:
Defining IP network regions can be quite complex. For detailed information on the use and
administration of IP network regions, see ''Administration for Network Connectivity for
MultiVantage Software, 555-233-504.''
1. At the SAT prompt, type change ip-network-region 1.
The S8300 displays the IP Network Region screen.
Figure 52. IP Network Region Screen
change ip-network-region 1
Region: 1
Name:
Audio Parameters
Codec Set: 1
Location:
UDP Port Range
Min: 2048
Max: 65535
DiffServ/TOS Parameters
Call Control PHB Value: 34
VoIP Media PHB Value: 0
BBE PHB Value: 43
802.1p/Q Enabled? N
If necessary, complete the fields as described in ''Administration for Network Connectivity for
2.
MultiVantage Software, 555-233-504.''
Note: It is strongly recommended to use the defaults in the screen. However, for the
RTCP Enabled and RSVP Enabled fields, the entry should be n (no).
3. Press F 3 (
End
124
IP Network Region
Direct IP-IP Audio Connections? n
RTCP Monitor Server Parameters
Resource Reservation Parameters
E NT ER ) when complete.
Installation and Upgrades for the G700 with an S8300/S8700
IP Audio Hairpinning? y
RTCP Enabled? n
Use Default Server Parameters? y
555-234-100 — Issue 2 — October 2002
Page 1 of
RSVP Enabled? n
2