Inserting/Ejecting The Data Cartridge - Fujitsu PRIMERGY LTO3 User Manual

2.2

Inserting/Ejecting the Data Cartridge

Handle the data cartridge properly referring to "3 About the Data Cartridge" ( pg.71).
2.2.1 How to insert
Insert the data cartridge slowly into the cartridge slot, with the arrow mark facing up and the label
panel facing you. Press the cartridge slowly until it is pulled in by the device.
To avoid damaging the product and the cartridge, note the following points.
• Do not use too much force.
• Insert the cartridge to the correct position in facing in the correct direction.
Insert direction
If you want to perform backup or restore operations immediately after inserting the data
cartridge, wait until the data cartridge is completely loaded (until the Ready LED turns on).
2.2.2 Ejecting (Manual, Automatic)
Data cartridges can be ejected both manually and automatically.
CAUTION
• Always eject the data cartridge after backup.
If a data cartridge is not ejected after backup, an error will occur when restoring.
"5 Cautions Concerning Backup"(pg.77)
Label area
2 Component Names and Functions
E
67