Fujitsu PRIMERGY LTO3 User Manual page 64

11
Click [Next].
The "Completing the Hardware Update Wizard" message appears.
12
Click [Finish], and click [Close] to exit.
Under [Tape Drive], "Hewlett Packard LTO Ultrium-3 drive" appears.
13
Perform redirect operation to FTvirtual Server following the
procedures set out in the chapter about "Operation after installing
an internal backup device" in the FT model User's Guide.
After redirecting to the FTvirtual Server, "HP Ultrium 3-SCSI SCSI Sequential Device" is
displayed as [Other devices] in [Device Manager] in the FTvirtual Server.
14
After installing the driver to FTvirtual Server by repeating steps 4 -
12, restart the FTvirtual Server.
1.3.3 About the Driver
Please download the latest driver for windows 2000 Server / Windows Server 2003 / Windows Server
2003 x64 from the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
64
• When restored in Temp folder of the drive C
C:\Temp\drivers\WinNT\Win2003\i386
• When using data from a CD-ROM
[CD-ROM drive]:\DRIVERS\tape\LTO3\drivers\WinNT\Win2003\i386