Fujitsu PRIMERGY LTO3 User Manual page 80

LED Status
Ready
Drive Error
Tape Error
Clean
Ready
Drive Error
Tape Error
Clean
o
Ready*
Drive Error
Tape Error
Clean
*LEDs turn on or
blink repeatedly.
Ready*
Drive Error
Tape Error
Clean
* Blinking quickly
Ready
Drive Error
Tape Error
Clean
Ready
Drive Error
Tape Error
Clean
Ready
Drive Error
Tape Error
Clean
80
Problem
This product is ready for use.
Normal operations (read, write) in
progress.
The drive has reached a particular drive
mode.
Downloading firmware.
Rewriting Firware.
Cleaning is required.
Cleaning.
Solution
None. Normal status.
None. Do no reset or restart.
Restart the server.
This problem will not occur during normal
operations. If this occurs at any other time
than when firmware is being rewritten
restart the server.
This problem will not occur during normal
operations. If this occurs at any other time
than when firmware is being rewritten
restart the server.
Insert a cleaning cartridge into the drive to
clean it.
Wait until cleaning has finished. When
finished the cleaning cartridge is
automatically ejected.
Cleaning takes a maximum of five
minutes.