Component Names And Functions; Eject Button And Leds - Fujitsu PRIMERGY LTO3 User Manual

2
Component Names and
Functions
This chapter explains the component names and functions of this product.
2.1

Eject Button and LEDs

Data cartridge insertion slot
Eject button
Press this button to eject the cartridge from the drive. Do not press this button for more than 10
seconds (Forcible ejection will be performed, and may cause errors in the OS and backup software).
"2.2.2 Ejecting (Manual, Automatic)"(pg.67)
Ready LED / Drive Error LED / Tape Error LED / Clean LED
These LEDs indicate the status of this product. The general meaning of each LED is as follows.
For details, refer to "6 LEDs" ( pg.79).
• Ready LED (Green)
LED Status
ON
OFF
Blinking
This product is ready for use.
Power is not turned on or an error occurred during the self diagnostic test.
Device is running
Eject button
Device status

2 Component Names and Functions

Emergency reset
Ready LED
Drive Error LED
Tape Error LED
Clean LED
65
E