Fujitsu PRIMERGY LTO3 User Manual page 56

WARNING
CAUTION
Recycling
To dispose of this product, contact an office listed in "Appendix B Contact Information" ( pg.88).
This product must be disposed of as industrial waste.
56
• Do not tinker with this product. Doing so may cause an electric shock or fire.
• Do not disassemble this product or take it apart.
• Do not use or store this product in the following environments.
- Environments with extremely low temperature
- Environments with extremely high temperatures and high humidity
- Environments where temperature and humidity change greatly and rapidly.
- Environments where a magnetic field may affect the device
- Environments that are subject to shock or vibration
- Dusty or smoky environments (e.g. cigarette smoke, cloud of dust, exhaust
gas, etc.)
- Environments exposed to direct sunlight
- Environments near any heat generating devices
• Moving the unit from a cold place to a warm place, or increasing the room
temperature quickly will cause internal condensation.
To avoid damaging the product or data cartridge, do not use the product if
condensation occurs. If the product is exposed to a significant temperature
change, wait for at least 1 hour before turning it on.
• Do not carry this product with the data cartridge left in it.
• When inserting the data cartridge, do not use force.
• Do not use this product when liquids or metal objects have fallen in it.
If some foreign objects have fallen into this product, contact an office listed in
"Appendix B Contact Information" ( pg.88).
• Remove the data cartridge from this product whenever turning the server off.
After inserting the data cartridge into this product, the tape recording surface is
exposed. If this situation continues for a long time, dust may stick to the recording
surface or the tape may be damaged. This might destroy the data cartridge
permanently.
• Remove the data cartridge from this product whenever it is not in use.
• If the front surface of this product is stained, wipe with a soft, dry cloth or a cloth
wet with water or mild detergent. Do not use volatile material such as benzine or
paint thinner.