Cleaning - Fujitsu PRIMERGY LTO3 User Manual

4

Cleaning

This chapter explains how to clean this product.
4.1
Cleaning
Head cleaning will be performed automatically when a cleaning cartridge is inserted into this
product.
This product uses a magnetic head to write and read data. If soiled with dust or dirt, the
magnetic head does not read or write data correctly.
Also, it could reduce the life of the data cartridge, scratch the magnetic surface of the tape,
or cause other kinds of trouble making it impossible to use. To avoid trouble, clean the head
using a cleaning cartridge.
Use the following procedures to clean.
1
Insert the cleaning cartridge into this product.
"2.2.1 How to insert"(pg.67)
Cleaning will start automatically.
2
All the LEDs of this product will display that cleaning is in
progress.
The Ready LED blinks and the Clean LED turns on.
3
The cleaning cartridge is ejected when cleaning operations are
complete.
Cleaning takes from one to five minutes.
4
The Clean LED turns off when cleaning is successfully completed.
This product reaches Ready status.
74
ON, Blinking, OFF
Ready
Drive Error
Tape Error
Clean
ON, Blinking, OFF
Ready
Drive Error
Tape Error
Clean