Chapter 3 Operating the LTO Library
3.2 Tape Cartridges
3.2.4
Write-protecting Tape Cartridges
All rewritable data cartridges have a write-protect switch to prevent accidental erasure or overwriting of data.
Before loading a cartridge into the library, make sure the write-protect switch on the front of the cartridge is
in the desired position.
Slide the switch to the right to write-protect the cartridge. A small pad-lock is visible indicating that the
•
cartridge is write-protected (see
Slide the switch to the left to allow the library to write data to the cartridge (see
•
Figure 3.4 Ultrium data cartridge
No.
1
Write-enabled
2
Write-protected
3
Write-protect switch
4
Barcode label
5
Insertion arrow
3.2.5
Backward Read Compatibility
You can find compatibility documentation at the following URL:
http://www.fujitsu.com/global/services/computing/storage/eternus/products/tape/lt20-s2/
3.2.6
Barcode Reader
The barcode reader provides inventory feedback to the host application and/or LCD screen by reading the
cartridge barcode labels. The library stores the customized inventory data in memory.
FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining
Figure
3.4).
Description
38
Copyright 2014 FUJITSU LIMITED
Figure
3.4).
P3AM-5382-03ENZ0