Table of Contents
Advertisement
2.
Remove the media that has been taken up.
Arm
Media
Reinforcement pipe
Cut-off Operations
Do not cut off the media while take-up is in progress. Take-up quits as soon as the media is cut off. Be especially
careful when you're printing more than one page.
Give Attention to Media Composition
For some types of media, cutoff is not possible.
Some types of media may remain on the platen after cutoff. If the media remains on the platen, remove it by
hand.
Retaining screw
Support the paper tube to prevent from falling.
The second person loosens the retaining screw and moves
the arm.
Detach the media from the flanges.
Flange
Detach the reinforcement pipe from the paper tube.
Media
Paper tube
2-2 Loading and Removing Media
Chapter 2 Operation
41
Hide quick links:
Advertisement
Table of Contents
