Table of Contents
Advertisement
When using the core from used-up rolled media as the paper tube
When mounting the paper tube on the flanges, make sure that the paper
tube fits snugly. Attempting to take up media when the paper tube is not
stable may cause problems such as the paper tube coming loose. The
outer diameter of the flange portion where the paper tube is fitted is
shown below.
Make sure the margin described below is present between each flange
and the edge of the media. Attempting to take up media when no margin
is present may cause the media to touch the flange and result in faulty
take-up.
Important Notes on the Media Take-up Systems
Never attempt any operation that pulls the media by using
and result in an error.
2-2 Loading and Removing Media
Side view of flange
3 in.
(76.2 mm)
Media
Media flange
20 mm (13/16 in.)
or more
. Doing so may activate a protective feature
2 in.
(50.8 mm)
Paper tube
Media
flange
Chapter 2 Operation
39
Hide quick links:
Advertisement
Table of Contents
