Use adhesive tape to fasten the media securely to the paper tube.
To prevent the pulled-out media from becoming crooked, secure with tape at the two edges and
center.
First fasten the center in place, then fasten the edges.
Take-up with outward curl
Paper tube
Adhesive tape
Take-up with inward curl
Paper tube
Adhesive tape
Fasten first.
Fasten first.
Pull back the loading lever to secure the media in place.
Loading lever
Press
Ensure a certain amount of slack, as shown in the figure.
2-2 Loading and Removing Media
to pull out the media.
Chapter 2 Operation
35