Roland Hi-Fi Express FP-740 User Manual page 35

Media flange
Roll media
Reinforcement pipe
When roll media sag severely, use the reinforcement pipe in-
serted into the roll media. After use, remove the reinforcement
pipe from the paper tube.
End caps
If the left or right edges of the media strike the media flanges
with force, affecting media feed, then use the end caps instead
of the media flanges.
Fit the roll media onto the media flange that is on the left
side when viewed from the back.
Press in all the way.
Move the media flange on the right side (as seen from the
back) sideways and fit it into the roll media.
Media flange
Screw
2-2 Loading and Removing Media
Roll media
Reinforcement pipe
Media flange
End caps
Chapter 2 Operation 33