Table of Contents
Advertisement
Adjust the positioning of the slider unit to match the width of the media.
Adjust so that the gap between the media and the slider unit is 1 to 3 millimeters.
1 to 3 mm
Tighten the knobs at the back.
Make sure the slider units do not become titled as you do this.
Slider unit
Knob
Pass the tracking shafts through the looped media and fit then into the grooves of slider unit (right
and left).
Attach the stoppers at both ends.
Stopper
Slider unit
Slider units
Slider unit
OK
Not OK
Stopper
Tracking shafts
2-2 Loading and Removing Media
1 to 3 mm
OK
Not OK
Media
OK
Not OK
Chapter 2 Operation
Media
37
Hide quick links:
Advertisement
Table of Contents
