Preventing Media From Coming Loose - Roland Hi-Fi Express FP-740 User Manual

4-5 Accommodating Various Kinds of Media
Description
You use this when ink dries poorly. Larger values produce progressively slower movement of the media, enabling you
to extend the drying time accordingly. Printing time takes correspondingly longer.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's
setting is used and the printer's setting is ignored.
Default Setting
[SCAN INTERVAL] : OFF

Preventing Media from Coming Loose

Procedure
MENU
SUB MENU
SUB MENU
VACUUM POWER
VACUUM POWER
AUTO
W 1839 mm
SETUP SHEET
Description
The platen uses suction to grip the media and keep it stable. When media comes loose from the platen because it is
warped or wrinkled, increasing the suction force may help correct the problem. Conversely, when the media is flimsy
and cannot move smoothly, reducing the suction force may help.
When set to [AUTO], the suction force is automatically adjusted to the optimal level for the media width.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's
setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
82 Chapter 4 Feature Reference
90%
Press .
Press several times.
Press .
Press several times.
Press .
Use to set the value.
Press to enable the setting.
Press .
Press to go back to the original screen.