Printing The Amount Of Remaining Media - Roland Hi-Fi Express FP-740 User Manual

4-7 Recording the Amount of Remaining Media
AUTO DISPLAY
DISABLE
W 1839 mm
SETUP SHEET
Description
Setting this to [ENABLE] automatically displays [SHEET REMAIN] whenever you change the media and finish setup.
This makes it impossible to go on to the next operation unless you redo the setting for the amount remaining. This can
be useful for keeping you from forgetting to redo the setting when you change the media.
When you set this to [ENABLE], however, be sure to also set the [SHEET TYPE] menu item to [OPAQUE]. When [SHEET
TYPE] is set to [CLEAR], then [SHEET REMAIN] is not displayed automatically, regardless of the setting for [AUTO
DISPLAY].
Default Setting
[AUTO DISPLAY] : DISABLE

Printing the Amount of Remaining Media

Procedure
MENU
SHEET REMAIN
SHEET REMAIN
PRINT MEMO
W 1839 mm
Description
This prints the amount of media remaining that is displayed at the top menu. You use this when you want to make a
record of the remaining length of the media now in use. Printing the amount of media remaining before you change
the media enables you to refer to the printed record and use the value to make the setting for the remaining amount the
next time you use the media.
90 Chapter 4 Feature Reference
Press
Use
ENABLE
Press
Press
L 25.0 m
Press
L 25.0m
Press
Press
Press
Press
Press
L 25.0 m
Press
.
to select [ENABLE] .
to enable the setting.
.
to go back to the original screen.
.
.
.
to perform printing.
.
to go back to the original screen.